|
Socoder -> Off Topic -> OMG! A 464 Tape Counter |
|
| Sat, 02 Apr 2016, 04:50 | |
Dabz
|
DAVVEEEEEEEEEEEEEEEEEEEEEEEEEEEEE: Linkage
-=-=- Intel Core i5 6400 2.7GHz, NVIDIA GeForce GTX 1070 (8GB), 8Gig DDR4 RAM, 256GB SSD, 1TB HDD, Windows 10 64bit 
|
| Sat, 02 Apr 2016, 04:50 | |
|
GfK |
Woo! Might finally get the auld 464 working properly again!  Thanks for the heads up.
|
| Sat, 02 Apr 2016, 04:59 | |
|
Dabz
|
Shawingggggggggggggg:- https://www.ebay.co.uk/itm/Sinclair-ZX-Spectrum-3-Amstrad-Schneider-CPC6128-664-3-floppy-disk-drive-/191834656923 Know you and Jay are sorta [maybe not] after one! Dabz -=-=- Intel Core i5 6400 2.7GHz, NVIDIA GeForce GTX 1070 (8GB), 8Gig DDR4 RAM, 256GB SSD, 1TB HDD, Windows 10 64bit
|
| Sat, 02 Apr 2016, 05:15 | |
|
GfK |
Sorta... but I still haven't tested the 12V line on my CPC monitor, or the MP2. Accessing the floppy drive with the MP2 causes the power to trip off, and the drive is stone dead when running of the monitor's 12V feed. So suspect they're both faulty, but in different ways, and the floppy drive might actually be fine now I repaired the iffy wiring.
|
| Sat, 02 Apr 2016, 05:26 | |
Jayenkai
|
I'm still not even sure why mine's not working.. Haven't even looked into it. I turned it on, it went "grrrrr" and I assumed it was the drive belt. .. That's as far as I've gotten! -=-=- ''Load, Next List!''
|
| Sat, 02 Apr 2016, 05:42 | |
|
GfK |
Probably is, if it's the original belt. If it's been sat unused for years the belt will have perished and adopted the "shape" of the spindles. Not expensive to replace, but they're a right bugger to do.
|
|
|
| |||
|
| ||||