Curiosity has overtaken me

-=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- (c) WidthPadding Industries 1987 0\|447\|0 -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=-
Socoder -> Blitz -> Curiosity has overtaken me
Page : 1 2 Next Prev
Sat, 28 Apr 2007, 06:35
Blitz3Dman	I've been wondering this for a mighty long time and I figure I ought to ask eventually. Is it possible, using Blitz, to read a wed-hosted image and use it in a program? It may sound a little far fetched, but if I can read the image data online, I know how to do the rest. -=-=- There are 10 kinds of people in this world - ( Insert 16 remarks about to what extent people know hex here )
Sat, 28 Apr 2007, 06:44
bram32	You could use the BlitzGet function. I tried it once, however I don't remember which version. So if this version doesn't work, try searching for 'blitzget' in google. www.blitzbasic.com/codearcs/codearcs.php?code=24 It downloads the data first, after that, you can open it.
Sat, 28 Apr 2007, 06:44
oscar	it is... I'll get my code for it... I put it into my BHTML program a while ago... Basically you open the file using the network functions.. and save the stream (minus teh httpd bits) as a file with the apporriate extension (you can delete or overwrite the file as needed) (stand by for edit with da codez)
Sat, 28 Apr 2007, 09:52
JL235	You could also make your own image loading routine. You'd read the data from the stream, make a new image buffer, and then draw the data to the buffer. I've made my own code for reading and loading .bmps a few times. But other images formats are a lot harder because of the compression they use (especially .jpegs). One time I wanted to load and store image data into an array. Reading the image straight as a file, rather then loading as an image and reading from an image buffer, was phenominally faster.
Sat, 28 Apr 2007, 10:35
Blitz3Dman	Erm, oscar? You posted that a few hours ago... I know how to do the making the image bit, it's just I don't know how to get the data in the first place -=-=- There are 10 kinds of people in this world - ( Insert 16 remarks about to what extent people know hex here )
Sat, 28 Apr 2007, 10:41
flying_cucco	Blitz includes commands for working with TCP streams so you can download files easily. Function DownloadFile(server$,url$,filename$) Local tcp,file ;connect tcp=OpenTCPStream(server$,80) ;ok? If tcp<>0 Then ;request file WriteLine tcp,"GET "+url$ WriteLine tcp,Chr$(10) ;wait until data arrives While Not ReadAvail(tcp) Wend ;make output file file=WriteFile(filename$) ;loop while getting data While Not Eof(tcp) ;get byte and write to file ;DebugLog ReadByte(tcp) WriteByte file,ReadByte(tcp) Wend ;clean up CloseFile file CloseTCPStream tcp ;ok Return True EndIf End Function --v \|edit\| minor fixes \|edit\|
Sat, 28 Apr 2007, 10:48
Blitz3Dman	Unfortunately, I don't know what the server bit of it is.. the one time I tried to work with internet stuff, well let's just say I made a mess of things, especially my brain. -=-=- There are 10 kinds of people in this world - ( Insert 16 remarks about to what extent people know hex here )
Sat, 28 Apr 2007, 10:55
flying_cucco	This function basically asks a webserver for a file, and dumps it to a local file, just like your webbrowser would if you downloaded it there. server$ = the server you are connecting to, ie "www.google.com". url$ = the full url (address) of the file, ie "https://www.google.com/intl/en_ALL/images/logo.gif". filename$ = the name of the file you will save it as, ie "logo.gif"
Sat, 28 Apr 2007, 11:08
Blitz3Dman	Oh, ok. I'll have to have myself a look at that then, because I've been wondering how I can make a WW with no images required... -=-=- There are 10 kinds of people in this world - ( Insert 16 remarks about to what extent people know hex here )
Sat, 28 Apr 2007, 11:12
Blitz3Dman	Hm... what is the signature for a .bmp?
Sat, 28 Apr 2007, 11:20
flying_cucco	What? A curly x maybe? \|edit\| Sorry, what I meant was, I don't understand the question. \|edit\|
Sat, 28 Apr 2007, 11:37
Blitz3Dman	Every type of file has something at the beginning to say that it is this file and it usually takes up several bytes. What I meant was, I don't know what is at the beginning of a .bmp to say that it is when a program reads it. -=-=- There are 10 kinds of people in this world - ( Insert 16 remarks about to what extent people know hex here )
Sat, 28 Apr 2007, 11:41
flying_cucco	Oh, right. As ever, Wikipedia has technical details. The first two bytes are "BM".
Sat, 28 Apr 2007, 11:44
Blitz3Dman	Many thanks, flying_cucco, that's just what I needed -=-=- There are 10 kinds of people in this world - ( Insert 16 remarks about to what extent people know hex here )
Sat, 28 Apr 2007, 12:05
Blitz3Dman	Is anybody getting connected to the server? I don't know if my code is wrong or if my internet feels like being stubborn. LoadWebImage("https://img252.imageshack.us/img252/1088/b3dmsmallqt3.png") Function LoadWebImage(url$) Local tcp,file,pos=7,server$="" Repeat pos=pos+1 found=1 If Mid(url$,pos,1)<>"/" Then found=0 server$=server$+Mid(url$,pos,1) DebugLog"Finding server..." Until found=1 server="https://"+server DebugLog"Server detected at: "+server ;connect DebugLog"Connecting to server..." tcp=OpenTCPStream(server$,80) ;ok? If tcp=1 Then DebugLog"Connection to server successful." ;request file DebugLog"Requesting file..." WriteLine tcp,"GET "+url$ WriteLine tcp,Chr$(10) DebugLog"File retrieved." ;make output image img=CreateImage(10,10) If ReadByte(tcp)=Asc("B") And ReadByte(tcp)=Asc("M") Then DebugLog"Image is a .bmp" Else RuntimeError"Online Data is Not a .bmp image file." ;loop while getting data ;While Not Eof(tcp) ;Wend ;clean up CloseFile file ;ok Return image Else DebugLog"Connection to server failed." EndIf End Function WaitKey() End --v -=-=- There are 10 kinds of people in this world - ( Insert 16 remarks about to what extent people know hex here )
Sat, 28 Apr 2007, 14:14
bram32	I seem to be able to download it. For some reason, you need to remove the http part from the server when creating the stream. Then you should check if the stream <> 0, instead of checking if it is one, because when it is valid, "tcp" contains a handle to the stream: LoadWebImage("img252.imageshack.us", "https://img252.imageshack.us/img252/1088/b3dmsmallqt3.png") Function LoadWebImage(server$, url$) Local tcp,file,pos=7;,server$="" ; Repeat ; pos=pos+1 ; found=1 ; If Mid(url$,pos,1)<>"/" Then found=0 ; server$=server$+Mid(url$,pos,1) ; DebugLog"Finding server..." ; Until found=1 ; server="https://"+server ; DebugLog"Server detected at: "+server ;connect DebugLog"Connecting to server..." tcp=OpenTCPStream(server$,80) ;ok? If tcp Then DebugLog"Connection to server successful." ;request file DebugLog"Requesting file..." WriteLine tcp,"GET "+url$ WriteLine tcp,Chr$(10) DebugLog"File retrieved." ;make output image img=CreateImage(10,10) ;the file is a .png If ReadByte(tcp)=Asc("B") And ReadByte(tcp)=Asc("M") Then DebugLog"Image is a .bmp" Else RuntimeError"Online Data is Not a .bmp image file." ;loop while getting data ;While Not Eof(tcp) ;Wend ;clean up CloseFile file ;ok Return image Else DebugLog"Connection to server failed." EndIf End Function WaitKey() End --v
Sat, 28 Apr 2007, 14:22
Blitz3Dman	Thanks. Now I just need to find out how to read a .png... fun for some reason imageshack likes to host your bmp as a png OH! I'll make it so many image types are supported and maybe people will never have to use the LoadImage() and LoadAnimImage() commands ever again!!! (given they can access the internet) And the new code is this. there still is no server paremeter because it's possible to derive it from the url, thus the newer code: LoadWebImage("https://img252.imageshack.us/img252/1088/b3dmsmallqt3.png") Function LoadWebImage(url$) Local tcp,file,pos=7,server$="" Repeat pos=pos+1 found=1 If Mid(url$,pos,1)<>"/" Then found=0:server$=server$+Mid(url$,pos,1) DebugLog"Finding server..." Until found=1 DebugLog"Server detected at: "+server ;connect DebugLog"Connecting to server..." tcp=OpenTCPStream(server$,80) ;ok? If tcp Then DebugLog"Connection to server successful." ;request file DebugLog"Requesting file..." WriteLine tcp,"GET "+url$ WriteLine tcp,Chr$(10) DebugLog"File retrieved." ;make output image img=CreateImage(10,10) If ReadByte(tcp)=Asc("B") And ReadByte(tcp)=Asc("M") Then DebugLog"Image is a .bmp" Else RuntimeError"Online Data is Not a .bmp image file." ;loop while getting data ;While Not Eof(tcp) ;Wend ;clean up CloseFile file ;ok Return image Else DebugLog"Connection to server failed." EndIf End Function WaitKey() End --v I suppose the only thing left to do is to have it support some image formats. -=-=- There are 10 kinds of people in this world - ( Insert 16 remarks about to what extent people know hex here )
Sat, 28 Apr 2007, 14:25
Paul	I've played around with the code but i can't get it to work, anything special to think about? \|edit\| just saw you're new post, I like the thought of a png loader Still didn't work though \|edit\|
Sat, 28 Apr 2007, 14:28
Blitz3Dman	If you're getting the runtimeerror it's because my avabar was uploaded and saved on the web as a png, not a bmp, but I'm gonna finish the bmp eventually hopefully. -=-=- There are 10 kinds of people in this world - ( Insert 16 remarks about to what extent people know hex here )
Sat, 28 Apr 2007, 14:34
Paul	No, i wrote bytes and saved it as an image and let blitz load it.:S btw, here's a little code to check if a file is a png. If ReadByte(tcp)=137 Then ok=ok+1 If ReadByte(tcp)=80 Then ok=ok+1 If ReadByte(tcp)=78 Then ok=ok+1 If ReadByte(tcp)=71 Then ok=ok+1 If ReadByte(tcp)=13 Then ok=ok+1 If ReadByte(tcp)=10 Then ok=ok+1 If ReadByte(tcp)=26 Then ok=ok+1 If ReadByte(tcp)=10 Then ok=ok+1 If ok<>8 Then RuntimeError("File is not a .PNG") --v
Sat, 28 Apr 2007, 14:35
Blitz3Dman	Meh, meh, meh, meh ok, another question. the .png file signature includes the ASCII valuses for PNG and that's all fine and dandy, but then again, they're in hex. And the values are stored in one byte each and I have no idea how to read hex values from a file. Do I still use readbyte()? \|edit\| just saw your code, thanks. you posted it while I was posting this. \|edit\| -=-=- There are 10 kinds of people in this world - ( Insert 16 remarks about to what extent people know hex here )
Sat, 28 Apr 2007, 14:43
Blitz3Dman	O_o I had no idea of what I was getting into agreeing to write a .png loader, did I? Wow, I already have a headache -=-=- There are 10 kinds of people in this world - ( Insert 16 remarks about to what extent people know hex here )
Sat, 28 Apr 2007, 14:43
Paul	dec,hex 137=$89 80=$50 78=$4E 71=$47 13=$D 10=$A 26=$1A 10=$A Think i get them right, What i'm trying to say is that for the computer all the numbers are binary and it doesn't matter if you're using base 10 or 16 or whatever. Hope you see what i mean(and that I understood your problem correctly).
Sat, 28 Apr 2007, 14:49
Blitz3Dman	Ah, yes, both are true. Thank you. I think I'm going to do png last, it's giving me a headache and Wikipedia doesn't tell me how one might read the data. -=-=- There are 10 kinds of people in this world - ( Insert 16 remarks about to what extent people know hex here )
Sat, 28 Apr 2007, 14:52
flying_cucco	Can blitz read PNG files? It would save a lot of headache if you could cache the files to disk and then load them as normal.
Page : 1 2 Next Prev