123
-=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- (c) WidthPadding Industries 1987 0|674|0 -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=-
Socoder -> Film + TV -> Bill & Ted : Face The Music

Page : 1 Prev 2 3 Next 4
Tue, 08 Sep 2020, 06:45
spinal
50 lines = 5 frames at 10 lines...
The printer at work is a colour laser printer, so probably 600 or 1200 dpi or something like that, no problem there. It's just going to be a case of sizing the image.

-=-=-
Check out my excellent homepage!
Tue, 08 Sep 2020, 07:30
Jayenkai
Maybe print a set of stripes with pixels at different sizes, then see which looks best against it. Then you should be able to tell what ppi resolution the final pic should be,

A 256x256 image, a 320, 384, 448, 512 and up, all printed at the same physical size on the page, each with a set of ... say 8 coloured repeating single-pixel strips.

-=-=-
''Load, Next List!''
Wed, 09 Sep 2020, 01:34
spinal
Ordered the 50lpi a4 sheet. Lets see how this pans out.

-=-=-
Check out my excellent homepage!
Wed, 09 Sep 2020, 02:29
Jayenkai
Woohoo!
Thu, 10 Sep 2020, 01:45
spinal
o/k, work printer prints at 600 or 1200 dpi, so on 1200 thats 24 dots per line? So I could do 6 frames with each slice being 4 dots high...?

..I wonder if I can create an image with 1px == 1dot...

|edit|

1200/6 frames = 200 ?



-=-=-
Check out my excellent homepage!
Sat, 12 Sep 2020, 07:20
spinal
Another number to throw into the mix -- CD cover = 12cm^2

so...
50 lines per inch at 6 pixels per line = 300 pixels per inch ? x 4.75in = 1425x1425px image?

-=-=-
Check out my excellent homepage!
Sat, 12 Sep 2020, 08:48
spinal
OK, here's the test image.



Next step, check with the boss tomorrow if I can use the work printer for such a pointless exercise...

-=-=-
Check out my excellent homepage!
Sat, 12 Sep 2020, 09:02
Jayenkai
LOL!
Sat, 12 Sep 2020, 09:07
spinal
Better idea, amazon has some 3rd party ink (£4.02 including postage) for the printer that's been sat doing nothing for 10 years (because the ink was so expensive) which is still compatible with windows 10.

So that'll do me for as many tests as I need

The lenticular sheet came, it's thicker than I expected but still fits nicely inside a cd case.

Just need to think about either upscaling that gif, finding a blu-ray ripper and see if I can grab a better copy, or hand animating the album cover that you can find on google.

-=-=-
Check out my excellent homepage!
Sat, 12 Sep 2020, 09:46
Jayenkai
Should it be horizontal or vertical?
Sat, 12 Sep 2020, 09:59
spinal
I think horizontal lines will work best, less chance of crossover as eyes are usually placed horizontally...

-=-=-
Check out my excellent homepage!
Sat, 12 Sep 2020, 12:40
Jayenkai
I'm just trying to think of animated lenticular things, and whether I wiggled them left/right or up/down.
.. The only example I can think of is a Pac-Man Ghost Pin-badge from Lootcrate.
That's a left/right vertical wiggle..

I mean, you're right.. That definitely is how eyes work..
The problem, however, is that you're going to have to line the pixels up a LOT better if you want crisp horizontal lines to work.
With vertical lines, you get a little bit of "Oh, it's your eyes doing that..." leeway to cheat the effect.

-=-=-
''Load, Next List!''
Sat, 12 Sep 2020, 12:58
spinal
I'll start testing once the ink turns up 🤔
Sun, 13 Sep 2020, 06:34
rockford
The only example I can think of is a Pac-Man Ghost Pin-badge from Lootcrate.
That's a left/right vertical wiggle..


Don't forget that Xmas card I sent you a couple of years ago Jay...
Sun, 13 Sep 2020, 10:00
Jayenkai
Yup. Forgot about that! Tried digging it out. I know where it is, but ..
Gawd, my room's a right sodding mess.
Grrr...

-=-=-
''Load, Next List!''
Sun, 13 Sep 2020, 11:36
spinal
Apparently my printer resolution is 5,760 x 1,440 DPI...

As I'm planning on printing horizontal lines, that gives 115.2 dots per line...

I need to create some sort of calibration image as apparently these sheets lpi is only proximate and can easily be up to 0.5 lpi different either way. Looks like I'll need to create a giant image at fill printer resolution with a test pattern.

-=-=-
Check out my excellent homepage!
Sun, 13 Sep 2020, 11:57
Jayenkai
It's going to be square, so you can print the image rotated and get more lines.

-=-=-
''Load, Next List!''
Sun, 13 Sep 2020, 14:02
rockford
@Spinal - good luck

BTW I still haven't watched the film

I did watch the new Mulan movie though (which was great - it would have been better without a lot of really stupid CGI and air-fighting) and God-awful-zilla: King Of The Monsters. That was fecking shite.
Mon, 14 Sep 2020, 01:28
spinal
well, after days of searching, I finally found a website with information that actually still exists. Not only that, the software is still there!

https://vuethru.com/cat-mouseproject.html

Looks like it will take 99% of the guess work out of it

-=-=-
Check out my excellent homepage!
Mon, 14 Sep 2020, 01:35
Jayenkai
Hurray!!!!
Mon, 14 Sep 2020, 13:01
rockford
Most Excellent!
Tue, 15 Sep 2020, 10:04
spinal
After a morning of googling, then a quick mask made in psp7, then a quick program in blitz3d, then some manual flood filling....



I realized that I should have select which frames to use THEN cleaned them up, instead of doing literally 10 times the amount of work I need to

That gif was created from this



part of excellent adventure at the end when they're signing the CD for Rufus.

-=-=-
Check out my excellent homepage!
Tue, 15 Sep 2020, 10:20
Jayenkai
Nice and clean
Good job!
Tue, 15 Sep 2020, 16:26
rockford

Sat, 19 Sep 2020, 07:51
spinal
Initial test show that I need better quality paper. All of the lines bleed into each other

-=-=-
Check out my excellent homepage!
Sat, 19 Sep 2020, 11:07
rockford
Bugger
Page : 1 Prev 2 3 Next 4